Race Cars for Sale

Race Car Mart




Fill in the blanks with your information, then EMAIL your photo as a JPEG, GIF, PNG, or BMP file.(500 pixels or larger)
or send us the URL to your online photo.
NOTICE: Ads are only posted when payment is received - we prefer PayPal.**
**Race Cars for sale ads require a $20 payment and will remain on this page until the vehicle is sold. Use the PayPal button at right or send cheque or money order to our mailing address.
Please let us know when your vehicle has been sold.
Accepts Visa or Mastercard.
A PayPal account is not required.
384 Alexandra st
Sydney, Nova Scotia
B1S 2G4


$11,500.00 complete roller or $9,500.00 less trans and convertor
 1983 Z-28  Camaro Drag Car  Complete Roller
Drop your engine in it and go racing...
Hedman Hustler hedders 1 7/8 " primaries ..ceramic coated, for small block Chevy, MSD 2 Step RPM switch ....
MSD 6AL ...MSD coil Blaster 2 etc....
Biondo Little Wizzard delay box with cross talk / cross over
Fuel system : Jazz 5 gal. fuel cell ..dual spin on filters.. aluminum 1/2" line ...steel braided
Holley Max 250gpm ( black) and regulator
 Weld Draglite wheels ....M/T 14x32x15 rear ( 12 passes since new ) and M/T front runners... All lettering is decals and can easily be taken off ......350 forged pinion yoke,
Rear diff : GM 12 bolt  5:14 Richmond Pro gears ......
Bear's C-clip eliminator kit ...
Billet caps ...Strange 35 spline spool and axles ...5/8 " wheel studs, Ladder bar, Wheel-e bars
Q-A1 rear double adjustable shocks
Lakewood 90/10 front struts with coil over conversion kit on front, Front suspension limiters
Contact Ray: raybourque@rogers.com
Call or text 506-850-3491
Transmission : TH 350  3 spd.
TCI trans brake reverse valve body
TCI low gear planetary set 2.75 ratio
Dynamic Convertors( Frank Lupo ) 8" anti balooning etc. convertor 6200 stall...
CSI carbon fiber flex plate shield
TCI trans shield, TCI roller bearing tail housing.....
Hardened transmission yoke, B&M Pro Stick shifter
Bear's chromoly driveshaft w/ 1350 series joints ..... Transmission cooler:
Back halved .... 14 point roll cage ( mild steel )
Fully tubbed .....aluminum interior work etc...
Big tunnel opening for easy access to trans etc.
PA Racing tubular front K-member and control arms
After market steering column , shaft and quick release steering wheel, Kirky aluminum seat...
 RJS 5 point harness, Window net
Ed Quay bump steer damper kit and tie rod extension kit
Wilwood discs all around .  vented rear rotors.....
Lexan all around, Lightened doors and hatch
Harwood fiberglass hood and scoop
All gauges . switches etc.....
I have run Epping with this car and it passed tech @ national and divisional events ..... . .......... . . .if you need more info or pics ....just ask ..............

2003 Spitzer T-23 altered-certified to 7.50
125" 4 link
482 CI BBC with a glide
Has been 8.11@165 1.12 60'
Contact me at (506)961-9062 if you have any questions.

email = mike.oneill@homehardware.ca
2005 Polaris Sportsman 90 automatic 2 stroke.Set up for 1/8 mile JR class. Great for a beginner racer, can be raced at Raceway Park, Miramichi and Greenfield. Ready to race $1400.

Please call Shane @ 902-393-9435 for more information.
phone = 902-892-5400
email = shane@bolgermotorsports.ca
ZX14 Race bike only,no registration. Ready to race and easy to ride. Bike has gone 9.33 and 146.99mph in the 1/4 mile and 5.93 @ 122 in the 1/8th mile with 240 lb rider. Catalyst Composites body work, Power Commander 3 that has a Brocks Performance map to match exhaust. MPS air shifter with Dyna Shift Minder, Brocks clutch kit and MPS kill switch. Ready to race $8500
1989 Daytona rolling chassis set up for big block Dodge. Dana 60 with 4.10s/4 link 33x14.5x15 slicks /25x4.5x15 fronts .Barry Grant fuel system/ gauges/all wired/MSD, fiberglass frontend /doors/ rear hatch.
Needs scoop mounted to hood.
Drop motor and tranny in and go racing.
Asking $7500.obo   902-563-6985
email = billcrummey994@msn.com
Rear Engine Dragster
250 wheel base rear engine mono-shock dragster
23 cage will fit large driver ( 6 and 250 + pounds )
Adjustable foot pedals
Built at machine shop from Mark Williams plans in 2004 with limited 1/8 mile runs on it
Full floater 9 Ford rear end with 34 ½ x 17 x 16 beadlocks
Front and rear wing
Dual rear brakes and dual parachutes
Mega 450 electric shifter; MSD10 ignition; Racepak V300 recorder w/digital dash
Motor is 355 small block Chev,  little m block, Dedenbear shorty transmission with 6000 stall converter, Callis crank, new GRP rods, JE pistons, Bullett cam, Morel lifters, Jesel belt drive, Canton pan, Mooneyham blower manifold w/burst panel, 671 teflon strip blower, Enderley alcohol bug catcher w/port nozzles, Brodex heads, Jesel rockers
Best ET in 1/8 mile 4.62 at 146.5 mph 1.02 60 foot have video of run on facebook page under Gary Shetler send f/r to view have time tickets to prove
Willing to separate
Also have 28 tri-axle enclosed car trailer and 2006 National RV Dolphin Class A motorhome could be packaged deal

Call anytime for further info
cell is 613 541 7655, home 613 354 5518
email = shetler@kos.net
1984 Super Pro Camaro. 400sbc, powerglide, 12 bolt. rear back half 4 link with adjustable shocks. Front adjustable struts with coil over conversion. Tubular front cross member. Front wilwood brakes. Steel car except the hood, lexan rear window. Trans brake, dedenbear crossover delay box and Co2 start line controller/ throttle stop. Good car for 10.90/ 9.90 classes.
Engine has aftermarket block with all good pieces, dyno sheets ect. Stahl headers, ATI converter, BG fuel system.
Clean rust free body, been a race car since the late 80's. Runs 8.90@149 in good air, off the stop. $21000 turn key, or $15500 less engine.

2003 Hayabusa limited edition dragbike,1397 kit with head work and cams,undercut transmission,billet quick access clutch cover with rcc ultra soft hand slider clutch,rcc billet sprocket cover,billet adj sidestand,aluminum light subframe with tigertail,extended swingarm to 68 inches,drag pegs,co2 airshifter with autoshift, plus shift light,launchmaster 2-step,vortex rearsets,brocks sidewinder,bazzaz controller with autotune,catalyst seat,macintosh cahin guard,new chain and sprockets shortened forks,mirror block offs bike is super clean and fast, 8-90 and 5-60 $9900.00
email = jkkl.jones@seaside.ns.ca
phone = 902-849-1360
1996 Suncoast dragster for sale. Completely upgraded in 2012. New brake rotors, calipers , pads and lines, Dana 60 with new gears, new steering box, new wiring, new plumbing, radiator and water pump, new motor plates for SBC, Borla Stainless headers for SBC, all new electronics, Biondo Mega 450 box, all guages, wiring , cables, Scoop and carb tray, lines etc. 15x33 tires , very good condition. Selling as a roller without engine and transmission. Certified in June 2016 to 7.50. Just add your SBC and glide to be racing in 2016!
If you are interested, Contact Mike Gillis by email:  mgillis@mcw.com
1981 Malibu Roller.
Had mild BBC and 3 Speed 350 auto. 12 Bolt rear with 4.56 gears and driveshaft. Ladder bar car.
About 50 runs on brand new slicks.
Call or Text John Hill for more info
Retiring - For sale 1995 Cavalier certified Armstrong tube chasis.10.05@133mph 1.40 60ft,new slicks,new 425hp crate motor,ceramic headers,750 demon,barry grant fuel system,cheetah shifter,9"ford strange axles 4.56's,autometer gauges,dedenbear electronics,new belts and netting,aluninum rad,air blower with helmet,radios with head set,2 batteries,fuel jugs,msd trigger and distributor,graphics are removable,suitable for large or small driver,kirky aluminum seat, this vehicle needs nothing except a driver
$25,000.00 firm, PHONE 902-749-8699

Brand new 24'X8' trailer recently arrived from South Carolina. Well built including heavy duty hitch, lighting and drop down ramp. Ideal for your favourite race car. $9800.00 CAD
phone = 902-963-2888

email = jbrewer@eastlink.ca
NEW PRICE!!!! $10,000 MUST GO
Lots of new upgrades
1978 Pontiac LeMans - full roller less engine/trans.
100% rust free body, Full square tube chassis,
Bears' Performance  front and rear clips,
Ladder bar w/adjustable lower link rear suspension with  new Strange coilovers front and rear, fully braced 9 inch Ford rear with lightweight spool, 4.56 gears and Strange 35 spline axles, driveshaft loops front and rear,
NEW PRICE!!!! $10,000 MUST GO
Lots of new upgrades*March 2016
 Wilwood brakes on front with new Flaming river rack, Wilwood twin master cylinder and pedal assembly. Weld Draglite wheels, all new Lexan windows, fibreglass hood and deck lid, all aluminum interior, wheelie bars, 11 gallon fuel cell, tach, gauges and delay box. Full roll cage with funny car cage update built specifically for a large driver. Currently set up for Big block Chev.
Hooks anywhere - always goes straight - very consistent car prerfect for S/Pro or any of the Pro Tree classes.
Also have lots of parts for sale(mostly BBC)
- For more information call Chris

Looking to sell a Jr. Dragster so we can start on the new race truck. It is a 10 sec. car and was part of two team races. For $3500 this winner can be yours along with a large selection of parts, motors, and new slicks!!! Located in Bridgewater.

phone = 1-902-644-2112
email = bruhm@ns.sympatico.ca

 Brand new 8 x 24 foot(interior) cargo trailer for sale. Includes full rear ramps, side door, electrical and heavy duty trailer hitch. Driven from Georgia, USA. $11,800.00 CDN funds. Located at Brackley Pt Rd at the Charlottetown Airport.

 John at 902-963-2057
email = jbrewer@eastlink.ca
 For Sale 1978 Nova............ 1978 Nova, Alberta car ... Running 350 4 bolt main ... Bored out 30/1000 flat top Pistons ... High output cam ... New rear springs and hangers ... Lots of extra parts glass, interior parts , header panel and hood , stored in barn for past 5 years $10,000.00 plse only serious replies you can call
1989 Ford Mustang pro series drag car. Has 302 with 289 head engine built by Armstrongs in Nova Scotia. Quick shift Auto transmission. All kinds of extras. 506 567-6110 Asking 8000 O.B.O.  Easy Haul tandem trailer included.


We have for sale a Junior Dragster with chrome moly chasis, adjustable pedals, polar jr clutch setup, aluminum belt cover never installed, emergency kill switch new never installed, tack, data computer, new rear axle bearings, alcohol engine, after market head, removable steering wheel, removable nose cone, starter package, jacket and neck brace. Body and panels in good shape and it is black in color with flames. Asking $3200 OBO. No reasonable offer will be refused.

506-832-4809 or email colleen.06@hotmail.com
For sale or Trade ($6500)
1975 Pontiac Astre
Pro street car
Set up for small block chev. No engine or transmission. 9"Ford rear end. Strange axles MSD ignition. New Gauges new cheater slicks. Has fuel cell. Too many parts to list. Call Dave at 506-869-0975
email = demmons.jesse@gmail.com

$14000.00 COMPLETE
CALL : BILL CLARKE 902-468-1738
email = dragcar1969@hotmail.com
Complete racing operation for SALE or TRADE
Track has moved, need new strategy for transportation and racing.
2004 Undercover triple slip joint 225' Huge 25" cockpit, 1524 LBS with full fuel and twin batteries. Runs steady 7.6s in decent air has been in 5s.
Pat Musi butil SBC/single Gary Williams Dominator. Built for NOS, never used. Dynoed 944 at Musi/Edelbrock speed shop, with no vacumn or proper headers !!!
24' trailer with all equipment and spares, 1/2 drum C-16 etc. etc included. All I'm taking is select hand tools.
Have all car photos/videos, dyno photos/videos, build sheets dyno sheets ready for email out to serious buyers.

Will be selling totally fresh and season ready.
40K for everything,(over 30k invested in engine alone), or will trade for Piper or Cessna aircraft.
Located in NFLD, can split cost on delivery to Maritimes.
Street legal turbocharged octane on demand LS powered 1985 Camaro IROC. Includes 4.8, 5.3 and 6.0 motors, 4l80e, th400, Weld Wheels and Mickey Thompson e.t. radial tires, stock wheels and tires, Sfi approved fire boots, pants, gloves, neck brace, jacket, spare 9" pumpkin with 3.70 gears

Turn key, daily driveable horsepower.
Two independent fuel systems controlled by a single ecu feed dual injectors per cylinder to create a seamless on the fly switch from 100% gasoline to 100% methanol. Drive around like an everyday truck motor, no radical camshaft, 8.9-1 compression. Then when you get into the throttle experience 25+ psi of boost while burning 100% methanol as the ecu controls the switches back and forth based on rpm.

I drove this to work all summer, this motor is REALLY fun on the highway and is whisper quiet at idle. This fuel system is capable of supporting 2500+ hp on gasoline.

2008 4.8 LY2 truck engine, 799 heads, pac 1218 valvesprings, arp head studs, corvette oil pan and exhaust manifolds, modified vic jr intake manifold
75mm t6 s475 1.32 cast wheel turbo, 60mm wastegate
2.5" undivided hotside, 27lb gasoline injectors
walbro 255 fuel pump, 225lb billet atomizer injectors
aeromotive 11105 belt pump, aeromotive 13113 regulator, fst 500 fuel filter, bmrs fuel lines
megasquirt 3.57x ecu, msd 6012 ignition box
innovation mtx-l wideband o2 sensor
turbo werx oil scavenge pump
3" cold side piping, stock truck throttle body
4" exhaust, 100% methanol
87 octane gasoline
#8 non projected tip spark plugs
other than these parts listed everything else is factory issued engine parts. If this combo gets hurt, it a real cheap fix.
laptop with all programs included. This is the same Efi technology that Larry Larson used to win Dragweek this year.

4.44 gear ratio Ford 9" with ladder bars, 33 spline axles and 1/2" wheel studs, Umi 700r4 cross member, energy suspension mount, Umi billet aluminum motor mounts, rear mount battery with shut off switch, b/m ratchet shifter, 4" electric butterfly exhaust dump, has 20+ year old paint without any rust. power windows, kirkey seat, 5 point belts, roll bar, air fuel ratio gauge, dual trans coolers, aluminum rad, manual brakes, manual steering, trailer hitch.

The turbo is rated to support 1050 h.p.
fuel pump is rated to support 3600 h.p.
injectors are rated to support 2500 h.p.

here's the intake build

NEW PRICE Aug 5, 2015
$8990 as is. (hurt motor)

2001 Dan Page race cars dragster, 230 wb hard tail upgraded in 2006, mark williams rear end, msd digital 7, biondo 450, wing, wheely bar, paint refreshed last year. Beautifull and winning car. all the best on it !
ONLY 11k rolling !!
Contact me during day at 418-625-2121 or night and weekend at 418-625-9186.
emails: beaulieuperformance@sogetel.net or ced883@hotmail.com

For Sale: 1986 Super Pro Firebird. 468 BBC ,alum. heads,jesel rockers and belt,scat crank and rods,alum oil pan,delay box,electric shifter ,etc. tube chassis from firewall back,12 bolt rear,disc brakes all wheels,power glide,ati converter. 2960 lbs.with driver . asking $24,000.00 complete.
email = paulenback@eastlink.ca
phone = 902-543-7860

1994 Camaro  - Drive to the track  and run 10.90  with NOS. One of the best rigged street race cars I have seen, roll cage, strange rear end -  car is mint but going different way. Just appraised at $32,000 Selling $21,000  - Give us a call

Phone = 506-843-6210
1970 Mustang - Rolling Chassis
-Tube Chassis (sq)
-Tubular Control Arms with Wilwood Disc brakes
-Reinforced 9" with Wilwood Disc Brakes,
 Strange 35 Spline Axles & Spool,3:89 Pro Gears
-Bear's CM Drive Shaft
-New RJS Seat Belts & Window Net
-Autometer Tack & Guages, Dash installed with
 Dzus Fastners, also has Ford Style Padded Dash
-Delay Box,MSD Ign,Switches mounted on Roll Cage
-Aluminum Interior except under Driver
-Fuel Cell & Aeromotive Fuel Pump rear mounted
-Winter's PG Shifter and Counsel
-Lexan Glass all around -Fiberglass Hood & Scoop with Dzus Fastners -Fiberglass Front end with Mustang Grill & functional Headlights -Fiberglass Doors with Original door Handles-Fiberglass Trunk with Aluminum Wing, Simpson Chute -Front and Rear Motor Plates for BBF
-Ceramic coated BBF Headers
-Aluminum Rad, Transmission Cooler with Fans
-5" Weld Front Wheels with Goodyear Draglites
-14" Welds on rear with 33.5 X 15 Hoosiers
-Paint is very good
 Car went a best of 8.95@151 with a BBF,1050
 Carb and 3:89 gears,runs consistant 9.0's.
 will deliver as far as Ont Free.

If you are
 looking for a great car everyone loves to
 take pics of, this is the one, $22,000
 Got questions, e-mail or call 902-922-2266 or
email = fmackie@ns.sympatico.ca


1998 Mark Williams 240"dragster,updated with an s&w four link conversion 3 years ago at a cost of $5000.00..all brand new unpainted aluminum body panels.wheels are not included but will provide some when i receive the new car..set up for bbc,selling as a roller only.dedenbear delay box,air shifter,msd 7al3,fuel cell,new belts this year etc..$14500.00 obo will deliver

PhoneNumber = 506-383-0253
email = tom2011@live.ca
1986 Pontiac Grand Am
2x3 tube chassis, 8 and 3/4 rear end ladder bars 411 gears moser spoll and 35 spline axles 6 way eagle shocks 15x14 rear weld wheels 14x31 slicks and 18 .50x 31 tire 8 point roll cage auto meter gauges mustang two front end aluminum rad big block headers and small block header fiber glass hood qa1 adjustable front shocks and springs rear and front fuel cell street legal rolling chassis

$12,000 obo Robin 506-472-4351 or 506-459-5249
1965  Front Engine Dragster . 132" WB in great condition. Never wrecked or smashed. Has mild 427 BBC, Glide (brake & 5500 converter) & 8 3/4 (4.10-spool) rear. Lots of electronics - MSD 7al, 3 step, electric shift, delay box, starter/saver, etc., etc. Runs 9.40's shifting at 6800; finishing at 6600.
 Car was run by Lloyd Noxell in 1965 and Bob Jolly (London Ont.) from '67 - '71 and was national record holder for several years.
Car was comfortable for me at 5'9" - 210# and my son had no problem at 6'1" - 185#.
 Dragster fits easily in 16' by 24' garage and can be easily towed with a 6 cyl.car or truck. We towed reliably with a slant 6 truck for years , and more recently with my 1970 Chevelle or our Toyota Tacoma.
email = rondvx@gmail.com
Car is fun and economical to race or show and priced reasonably at $15,000 complete. May sell rolling. Delivery may be available at cost. Email for more pics.
PhoneNumber = 902-862-3516
2002 Junior Dragster, two motors with it, one is a 5hp  stock Briggs and Sratton which runs 14s, the other,  is a 5hp Briggs and Stratton on Alcohol that has an aftermarket head, piston, flywheel, and carburetor, this motor runs low 12s. The cage has been raised and the foot petals are adjustable so anyone can fit in it. It has two brand new front tires, comes with a jacket and gloves,and more than enough spare parts. Always stored inside. Asking 3200. Montague, PEI. 838-3732
 Baja Fatboy from Canadian Tire, I put a back seat on it & only drove it at the track. There's about 30km on it paid $650 asking $400 0B0
 506-757-2589 Grandbay
2012 Lark Car Hauler 24ft x 8.5  V-Nose with 5000lbs Torflex Axles with Alloy Wheels and Radial Tires
 Asking $ 8295   Call 902-436-0441 or 902-888-9218

For sale 1985 Capri rolling with 350 turbo trans. Car is all set up for sbc and I have off set motor mounts for sbc to fit and headers for car go with they are made to clear steering arm with sbc in vehicle all windows except front windsheild are lexan. Car has a B&M megashifter,6 point roll cage and was just painted at the end of august all control arms in back are boxed arms and has a ford 7.5 rear end full posi. This car has ran pro class for three years now and has always ran straight. I am asking 2000$ obo call (902)794-4616 or (902)549-2704 or (902)304-3061 or email @ brianwoodfine_16@hotmail.com
1968 Chevelle Pro Touring
Big Block Chevy, TH400 trans,  All aftermarket suspension - Dana 60 rear, tubular control arms up front, way too much to list - body, interior and frame are mint. Runs 11s easy in the 1/4 mile  and handles like a Corvette on the street. For more information phone Chris MacDonald
1993 Camaro Z28, Street/strip, Procharged 350 with approx. 550 horsepower, 700 R4 Transmission 12 Bolt rear, 3.90 gears with powertrax locker, Disk brakes all around, Prostar wheels all around, autometer guages, 6 point cage, fuel cell, electric fuel pump, 3" mandrel bent stainless exhaust into two flowmasters, Hasn't been licensed or inspected since 1999, been garage kept since, car was in miramichi in 1998 and went 10.90's, great shape outside, inside, and underneath.
Awesome car! in storage right now, can store for winter if need be, Asking $13,500, Call Peter Hobart for anymore information.
Home - 506-757-2599 (after 7pm)
Cell - 506-645-8775
Office - 506-738-8481
1973 Pro-Street Chevy Nova SS, 540 ci, 875 HP, 9.24@147MPH... Race Built Th400, Transbrake and delay box.. Dana 60 On ladderbar suspension... front coilover suspension... Best of everything, many extra parts included in sale, would consider trade... Call Curry Custom'z 506-523-9006
1991 Mustang LX notchback
black on black, 6 point roll cage
painless wiring kit and switch panel, B&M Ratchet shifter,
Autometer gauges, Harwood 6" extended hood
Harwood fibergalss trunk,
 QA1 tubular k member and a-arms, QA1 coil-overs, 12 way adjustable, Flaming River rack, 8.8 rear end with spool and 4:10 gears, upper and lower control arms, mini tubbed
drag lights front and rear
15x10 in the rear
with 325/50/15 drag radials
competition engineering rear coil overs 3 way adjustable
a1000 airmotive fuel pump with -10 in and out
braided line front to back
10 gallon fuel cell in rear
battery relocated to truck with a shut off switch
500 hp 350 chev virgin block
11.5:1 compression
victor jr heads
harland sharp roller rockers
arp heat stud kit
roller rocker stud girdle
super victor intake
barry grant gold claw carb.
msd billet distributor
msd 6al box, electric water pump, griffin aluminum radiator, Stand alone fuel system for nitrous
NOS big shot 125-325 hp
car has run 11:20's on the motor and 10:20's on the bottle with a 175 shot
please call 506-476-6118 for more details/information
1983 Suzuki Katana Drag Bike. This bike has been a prominent figure on the
Atlantic Drag Racing scene for many years. It has made countless 8-second blasts down the quarter mile, staying straight and upright every time. It has claimed numerous track and ADRA championships, and always looks great.The bike will be sold as a rolling chassis, but includes all the electronics,
air shifter, and Vance & Hines pipe. Just a motor and carbs to go racing.
$5000.00 OBO
Contact: Nevin Scott (902)940-5768  nabs1978@hotmail.com
1988 Camaro Legal Super Stock GT and
2005 Hallmark 28' Car Trailer
TRAILER - has 5 alloy spoked wheels, checker plate flooring with Allumium Tred Plate runners and tail gate, custom made birch cupboards and counter, 7800 watt generator, 120 volt wiring, and AM/FM radio.
CAR - 350 small block chev dyno sheets available putting out over 620 horse power, #441 heads machined by the late, Bruce McDowell, steel crank shaft, Lunati cam shaft, BME pistons prepped by Patterson, Davis headers, Cheetah air shifter, MSD trigger - RPM switch -Billet distributor - 7 AL box - timing retard - 2 step, !
Front end by Ed Quay, Rear End and 4 Link Suspension by S&W, Ford 9 in rear Housing 5:83 gears, 3 speed transmission by Shepps Transmission, Moly drive shaft, Koni adjustable front shocks, QA1 Adjustable rear coil overs, Bear wheelie bars, Weld drag lites front and back, New Hoosier front runners, 2 sets of Phoenix radial rear tires, lots of spare parts.
Phone 506-536-3611 or email blairlyn@nb.aibn.com
There is a great variety of race cars and parts available for sale and some good deals for the right buyers.
Back to top